EasyManua.ls Logo

Sinclair QL - Page 88

Sinclair QL
135 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
SCROLL -8, 1
Will scroll the part above (not including) the cursor line and:
SCROLL -8, 2
Will scroll the part below (not including) the cursor line.
As scrolling occurs, the space left by movement of the display is filled with the current Paper colour. A
second parameter 0 has no effect.
You can PAN the display in the current window left or right. The PAN statement works In a similar
manner to scroll but
Pan 40 moves display right
Pan -40 moves display left
A second parameter gives a partial PAN
0 - whole screen
3 - the whole of the line occupied by the cursor
4 - the right hand side of the line occupied by the cursor. The area of the cursor is also included.
If you are using stipples or are in 8 colour mode then windows must be panned or Scrolled in
multiples of 2 pixels.
PROBLEMS ON CHAPTER 12
1. Write a program which draws a 'Snakes and Ladders' grid of ten rows of ten rows of ten squares.
2. Place the numbers 1 to 100 in the squares starting at the bottom left and place F for finish in the
last square.
3. Draw a dartboard on the screen. It should consist of an outer ring which could hold numbers. A
'doubles' ring and 'triples' ring as shown and a centre consisting of a 'bull's eye' and a ring around
it.

Other manuals for Sinclair QL

Related product manuals