To Next Page
E
egomezAug 12, 2025
What happens if there is no gas in the SincoSald Welding System?
- MMaria BondAug 12, 2025
If the SincoSald Welding System detects no gas, the red lamp will remain illuminated.
What happens if there is no gas in the SincoSald Welding System?
If the SincoSald Welding System detects no gas, the red lamp will remain illuminated.
General| Input Frequency | 50/60 Hz |
|---|---|
| Output Current Range (AC/DC TIG) | 5-200 A |
| Protection Class | IP23 |
| Insulation Class | F |
| AC Balance | 30 - 70% |
| PFC | Yes |
| Efficiency | 85% |
| Power Factor | 0.99 |
| Cooling System | Fan Cooled |
| Output Current Range (MMA) | 10- A |
| Output Voltage Range | 10.2-18 V |
| Duty Cycle (TIG) at 40°C | 200 A at 25% |
| Duty Cycle | 60% |
| AC Frequency | 20- Hz |
| Pulse Frequency | 0.5- Hz |
| Protection Features | Overvoltage, Overcurrent, Overtemperature |
| Welding Process | TIG, MMA |