Sine Systems RFC-1/B Instruction Book

Section 1 — Warranty/Product Registration:
Warranty-
Sine Systems, Inc. agrees to repair or replace the RFC-1 Remote Facilities Controller or the
RP-8 Relay Panel at no cost, if the unit fails in normal use, during the first year of original
ownership. This Warranty does not include damage caused by improper installation or use.
nor does it include damage caused by any external means such as lightning or voltage
transients. For Factory Service Policy, see "Section 7 — Troubleshooting and Repair."
Suitability For Use
The purchaser and user of the Sine Systems RFC-1 Remote Facilities Controller or the RP-8
Relay Panel bears the sole responsibility for determining suitability of this equipment for their
intended use. Because this equipment can, as can any electronic equipment, fail in an
unpredictable or unexpected way, even in normal use, Sine Systems, Inc. cannot be held
responsible for damages, either direct or indirect, resulting from use of this equipment.
Under no circumstances should this equipment be used or relied upon in a situation where a
life-threatening condition could result if the equipment were to fail.
Product Registration
To help us know our customers and to keep them informed of future engineering, product,
and safety information, please fill out the following form and send a copy to Sine Systems at
the address below. It is not necessary to return this form to validate the warranty but it is
necessary if you wish to receive engineering bulletins.
If you did not purchase the equipment new, we still encourage you to register as an owner so
that you will automatically receive all pertinent safety and product information.
Record the following information and return a copy to Sine Systems:
RFC-1 Serial Number (on front panel):
Name of purchaser (company or call sign):
Mailing address: ____________________________
Contact Name:
Telephone:
Purchased from:
Date delivered:
3.00.2
page 1.1

Sine Systems RFC-1/B Specifications

General

Brand	Sine Systems
Model	RFC-1/B
Category	Remote Control
Language	English