Singer 111W156 User Manual (English)

Need help?

Do you have a question about the Singer 111W156 and is the answer not in the manual?

Singer 111W156 Specifications

General

Type	Industrial Sewing Machine
Stitch Type	Lockstitch
Operation	Manual
Feed Type	Drop Feed
Bobbin	Class 15
Stitch Options	Straight stitch
Tension Control	Manual
Needle Positions	Center
Presser Feet Included	Standard foot
Max Stitch Width	Not applicable
Speed	1100 SPM

Summary

USE SINGER OILS and LUBRICANTS

TYPE B - MANUFACTURING MACHINE OIL, HEAVY GRADE

Specifies Type B oil for general machine lubrication, providing minimum stain on fabrics.

TYPE D - MANUFACTURING MACHINE OIL, HEAVY GRADE

Specifies Type D oil for minimal fabric staining, suitable for storage periods.

OTHER SINGER LUBRICANTS

Details Type E (Thread Lubricant) and Type F (Motor Oil), plus Gear and Ball Bearing Lubricants.

INSTRUCTIONS FOR USING AND ADJUSTING SINGER SEWING MACHINE 111w156

THE IMPORTANCE OF USING SINGER PARTS AND NEEDLES IN SINGER MACHINES

SINGER Needles should be used in SINGER Machines

Emphasizes using genuine Singer needles, identified by the "SIMANCO." trademark on containers.

DESCRIPTION

NEEDLES

TO OIL THE MACHINE

HOOK LUBRICATION

THREAD

Use left twist thread for the needle

Advises using left twist thread for the needle and either twist for the bobbin.

TO REPLACE THE BOBBIN AND THREAD THE BOBBIN CASE

UPPER THREADING

TO PREPARE FOR SEWING

TO COMMENCE SEWING

TO REMOVE THE WORK

TENSIONS

TO REGULATE THE TENSIONS

TO REGULATE THE LENGTH OF STITCH

TO REGULATE THE PRESSURE ON MATERIAL

THE FEED REVERSING MECHANISM

THREAD CONTROLLER

To strengthen the action of the controller spring

Details how to adjust the thread controller spring tension using a screw and stud for better slack management.

TO SET THE NEEDLE BAR

TO SET A NEEDLE BAR WHICH HAS NO MARK

Provides steps for setting the needle bar when no reference marks are present on the bar.

FORWARD-AND-BACK POSITION OF NEEDLE BAR AND VIBRATING PRESSER BAR FRAME

TO ADJUST THE HEIGHT OF LIFT OF THE VIBRATING AND LIFTING PRESSERS

TO TIME THE SEWING HOOK

TO SET THE SEWING HOOK TO OR FROM THE NEEDLE

Details how to adjust the hook's position relative to the needle for optimal performance and thread clearance.

TO ADJUST THE NEEDLE GUARD ON THE SEWING HOOK

TO ADJUST THE FEED ROCK SHAFT BEARINGS

TO RAISE OR LOWER THE FEED DOG

THE FEED ECCENTRIC

TO ADJUST THE STITCH LENGTH INDICATOR

TO REMOVE AND REPLACE THE ARM SHAFT CONNECTION BELT

TO RE-ENGAGE THE SAFETY CLUTCH

TO ADJUST THE FEED REVERSING MECHANISM

Related product manuals