Singer 328 - Page 67

P.
N. Adjustment:
Adjust
the Fabric
Ptesser
the
needles
and so
that it
exceealing
0.3
n/n.
in such a
h'ay so
that
its
edge will
touch
will push
against
them
to the
extent
not
Front
Edge
Pig. I02
l-.
Push
about
60 needLes to
D
position
and
set
both
Russel
Levers
to the I
position.
2.
Check ho\^r the
edge of the Fabric
presser
touches
the needles
!'hlle movi.ng
the Carriage
fron left
to right.
3.
When
the
edge of the Fabtic Pressex
does
not
touch
the needles,
relnove the Arn
from the Carriage, place
the
Arm, with
its face
alokrnwards,
and with
your
hanals,
push
downwards,
NOTE:
If
too much force
is apptied,
the Arm
will
become so
bent that
the needles vJill
be
pushed
up
more
than necessary.
Iherefore,
the adjustment should
be naale so
that
the
edge of the Fabric
Presser will
be
gently
brought
into
contact
with the
needles
by degrees.
Latch
Needle
Fig. 103