Singer Initiale - Attaching Presser Feet and Guides; Attaching Presser Foot Shank; Edge;Quilting Guide Attachment

12
3
4
16
Raise the presser bar
dge/ quilting
dge/ quilting
(a). Attach the presser foot shank (b)
as illustrated. (1)
Lower the presser foot shank (b) until the cut-out (c) is
directly above the pin (d). (2)
Raise the lever (e).
Lower the presser foot shank (b) and the presser foot (f) will
engage automatically.
Raise the presser foot. (3)
Raise the lever (e) and the foot disengages.
Attach the e guide (g) in the slot as illustrated.
Adjust according to need for hems, pleats, etc. (4)
Turn power switch to off ("O") when carrying out any of
the above operations!
Attaching the presser foot
Removing the presser foot
Attaching the e guide
Attention:
Attaching the presser foot shank
EN
a
c
d
e
f
b
b
a
e
g
All manuals and user guides at all-guides.com