Need help?Do you have a question about the Singer Touch & Sew Deluxe Zig-Zag 600 and is the answer not in the manual?
General| Type | Mechanical |
|---|---|
| Model | 600 |
| Operation | Manual |
| Stitch Options | Zig-Zag and Straight |
| Needle Positions | 3 |
| Needle Type | 15x1 |
| Feed System | Drop Feed |
| Bobbin Type | Class 15 |
| Presser Feet | Buttonhole |
| Included Accessories | Bobbins, Needles, Seam Ripper, Screwdriver |
| Buttonhole Styles | 4-step |
Procedure for correctly inserting a needle into the sewing machine's needle clamp.
Adjusting the stitch width and selecting the needle's horizontal position.
Mechanism for choosing and changing decorative and zigzag stitch patterns.
Operation and function of the push button that controls the sewing reel mechanism.
Setting up the machine for straight stitching with the needle in the center.
Positioning the needle to the left or right of center for straight stitching.
Instructions for changing the position and replacing the throat plate.
Description of fittings used for straight stitch operations and their applications.
Description of fittings used for zigzag stitch operations and their applications.
Overview and selection of basic zigzag stitch patterns available on the machine.
Introduction to special discs that create unique stitch patterns.
Procedure for removing and installing special stitch pattern discs.
Using the stitch width selector to control the width of primary zigzag patterns.
Selecting the needle position (left, center, right) for primary zigzag stitches.
How to adjust stitch length for creating satin stitches.
Setting the correct thread tension for satin stitching for optimal results.
Creating new stitch patterns by combining primary patterns and variations.
Using the special purpose foot for creating buttonholes.
Technique for creating buttonholes with raised or corded effects.
Applying fabric designs using a corded effect with the special purpose foot.
Creating a thread shank for buttons using the button sewing foot.
Description and applications of the general purpose sewing foot.
Various seam finishing techniques using different stitch types.
Method for creating darts using a single thread for a clean finish.
Steps and tips for inserting zippers using the zipper foot attachment.
Using the seam guide for precise placement of top stitching.
Creating invisible or blind stitched hems for a clean finish.
Using blind stitching for a neat zipper insertion on delicate fabrics.
Using the foot hemmer to create decorative hems in one operation.
Repairing fabric using free motion stitching techniques.
Creating monograms using free motion zigzag stitching.
Applying decorative embroidery designs using free motion stitching.
Setting up the machine for straight stitching with two needles.
Using primary stitch patterns with the two-needle setup.
Instructions for removing the reel holder to clean the stitch forming mechanism.
Troubleshooting steps for common thread breakage issues.
Troubleshooting steps for common needle breakage issues.
Troubleshooting steps for when the machine skips stitches.
Troubleshooting steps for issues with fabric feeding through the machine.
Troubleshooting steps for when the sewing machine does not start.
To Next Page