24
Adjusting the length of the solid bracelet
Determine the relative lengths of the two sides before adjusting the length of
the bracelet. To ensure maximum comfort, both sides of the bracelet should
contain the same number of links. If this is not possible, the top bracelet strap
(above the 12 on the clock) should be longer.
It is not necessary to detach the solid bracelet from the watch or the clasp.
1. Loosen the screws on the side of the bracelet link which is to be removed
or added.
2. Remove the superfluous bracelet link or insert a new one.
3. Before screwing tight, add a small drop (no more!) of thread-locker
(AN 302-42 medium-tight) to the thread of the bracelet screw.
To Next Page
Loading...
