19
Winding the watch (crown position 1)
The crown is screwable (crown position 0). To loosen the crown, turn it counter-
clock wise. The movement is wound by turning the crown clockwise. About
40 winds of the crown are generally enough to ensure reliable functionality.
Under normal circumstances, simply wearing the watch every day should
suffice to keep the self-winding mechanism wound. The power reserve allows
you to take off your watch overnight without having to re-wind it.
Time adjustment (crown position 3)
In crown position 3, the motion is paused. This helps you to set the watch
precisely. Please make sure the date changes at midnight and not at
midday. Just move the hands forward until the date changes. Afterwards you
attempt to set the time. We recommend moving the hands past the desired
minute marker and then adjusting it backwards. The movement restarts as
soon as the crown is no longer in position 3.
Quickset date adjustment (crown position 2)
Set the crown in position 2 and turn it counter-clockwise until the correct date
appears in the date display window.
Please take care to fasten the crown after making adjustments.
To Next Page
Loading...
