13
English
Functions
Winding the watch
Crown “C” is screwable. Release crown “C” by turning it anticlockwise. Set it
to position “C1” and wind. About 40 winds of the crown are generally enough
to ensure reliable functionality. Under normal circumstances, simply wearing
the watch every day should suffice to keep the self-winding mechanism
wound. Please take care to fasten crown “C” again after making adjustments.
Time adjustment
Release crown “C”, set it to position “C3” and set the time. To make sure that
the date changes at midnight and not at midday, turn the hands forward
until the date changes. Then set the time. Our advice is to move the hand
past the desired minute marker and then adjust it anticlockwise.
Quickset date adjustment
Release crown “C”, set it to position “C2” and turn it clockwise. Please do not
make this correction between 9 p.m. and 3 a.m. as the gear wheels used for
changing the date are engaged. This could cause damage to the mechanism.
0818_14_BA_Chronograph_Sinn_RZic.indd 13 07.11.14 12:37
To Next Page
Loading...
