【Alarm Management】dispose alarm information automatically or automatic Press【OK】to
select
【Alarm Output (S) 】Alarm output time setup
【Level Setup 】Setup input alarm level signal. HIGH---high level input signal will enable
alarm. LOW---low level input signal enable alarm. Press【OK】to select.
【Recording Delay (M)】the time of the alarm recording when alarm signal occurs,
Select and press “SAVE” to save all setup
2.4.2 PTZ Setup
support 4 channels
Setup the address code for each channel
Setup Baud rate, support 600 . 1200.2400.4800. 9600.19200. 38400. 57600. 115200
PTZ Protocol support pelco-p, pelco-D
2.4.3 Time Setup
To Next Page
Loading...