DISC
25
After the first start and few hours of
working check the tightness of nuts
and screws, tighten them if needed.
Check up regulary (approx. every 50
hours)!
7.3 Replacing the blades
Sharp blades enable smooth cuts and high mower
performance. Reverse or replace the blades in due
time. Always replace both blades of individual disk.
Disks have left or right blades, depending on the
direction of rotation of individual disks.
WARNING! Always install the correct blades on the
disks.
– Repair works, maintenance, periodical
overhauls, cleaning and elimination of
funtctional disturbances must be
performed with the switched off drive
and stand still engine! Remove the
ignition key!
– Use protective gloves!
– Do not repair (grind) worn out blades.
Danger of blade ejection!
– When opening the blade box always
hold the cover open with one hand.
Danger of stroke!
33
2
3
1
35
36
5
37
4
34
6
4
To Next Page
Loading...
Need help?
General
