SIP Medusa Ti-1002 - Starting the Engine

20
EXPLODED DRAWING
13
OPERATING INSTRUCTIONS….cont
Starting the engine:
Step 1:
⇒ Turn the main engine switch to the on (1) position.
Step 2:
⇒ Turn the fuel tap to the on position.
Step 3:
⇒ Slide the choke lever to the left.
Note: The choke may not be needed if the engine is already warm or
the ambient temperature is hot.
03951 Ti-1002
03953 Ti-2002
Engine Switch
Caution: Never start the engine with any load connected to the gen-
erator.