SIRETTA SNYPER-LTE graphyte - Show Results; Show Summary

Registered in England No. 08405712
VAT Registration No. GB163 04 0349
Siretta Ltd
Basingstoke Road
Spencers Wood
Reading
Berkshire RG7 1PW
sales
email
web
+44(0)118 976 9000
sales@siretta.com
www.siretta.com
21
SNYPER-LTE Graphyte
User Manual
Download Latest Edition
Rev 1.7
Show Summary
Highlight ‘Show Summary’ by using the UP and DOWN buttons, and press OK. The
SNYPER Graphyte will display the number of cells by cellular network, technology,
and signal strength. Use the LEFT/ RIGHT buttons to switch between signal
strengths received on the device.
Press the DOWN button to scroll more information into view.
Figure 21. Displaying survey results
Show Results
Highlight ‘Show Results’ and press OK. The SNYPER Graphyte will display all results
with numbered cells from strongest to weakest. To switch between all signals found
in the survey, use the LEFT/RIGHT buttons. The buffer is circular so by pressing the
LEFT button it is possible to immediately access the weakest cell. To see additional
elds of information about the cell selected, use the DOWN button.
Figure 20. Displaying survey results
NOTE:
Two listings may be shown for one network operator. This listing is
created by the MNC and is because two different MNC’s may both be
associated with the same network operator.
Use the LEFT button to replace the network operator names with the
MCC/MNC (PLMN) numbers to see this. The RIGHT button returns the
view to network operator name.
NOTE:
If SCAN is selected by pressing the OK button, this will start a LiveSCAN.
Please read the section ‘LiveSCAN on page 33 for full details of how to
do this.