SIRETTA SNYPER-LTE graphyte - Performing a Single Survey

Registered in England No. 08405712
VAT Registration No. GB163 04 0349
Siretta Ltd
Basingstoke Road
Spencers Wood
Reading
Berkshire RG7 1PW
sales
email
web
+44(0)118 976 9000
sales@siretta.com
www.siretta.com
24
SNYPER-LTE Graphyte
User Manual
Download Latest Edition
Rev 1.7
Figure 22. Selecting survey to perform
Performing a Single Survey
To perform a single survey using the SNYPER Graphyte, follow the steps below:
Step 1. Select ‘Survey’ from the main menu and press OK.
Step 2. Use the UP/DOWN buttons to select the type of survey to be performed and
press OK.
Full Survey: Performs a survey of the LTE, UMTS and GSM*
networks.
LTE Survey: Performs a survey for the LTE networks only.
UMTS Survey: Performs a survey for the UMTS network only.
GSM Survey: Performs a survey for the GSM* network only.
* GSM is only available on the EU versions of the SNYPER-
Graphyte.
Step 3. Cycle option should be set at <1>. Press OK to perform a single survey.
When the survey is complete (takes 2-3 minutes), a list of saved results as shown in
gure 24 will be displayed.
Figure 23. Selecting survey to perform Figure 24. Survey complete
The le format is saved as:
Month:Day:Hour:Minute
[no extension]: The directory name
created into which the survey les
will be written.
.CSV: Comma separated value le.
.HTM: HTML web browser le.