EasyManua.ls Logo

SIRETTA SNYPER-LTE graphyte - Introduction

SIRETTA SNYPER-LTE graphyte
56 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Registered in England No. 08405712
VAT Registration No. GB163 04 0349
Siretta Ltd
Basingstoke Road
Spencers Wood
Reading
Berkshire RG7 1PW
sales
email
web
+44(0)118 976 9000
sales@siretta.com
www.siretta.com
3
SNYPER-LTE Graphyte
User Manual
Download Latest Edition
Rev 1.7
There are two base models of product covered by the User Manual. The original product,
the SNYPER-LTE GRAPHYTE, and the SNYPER-LTE GRAPHYTE V2. The SNYPER-LTE
GRAPHYTE V2 is an improvement on the original design, supporting additional cellular
frequency bands and additional LiveSCAN modes. In all other respects the SNYPER-LTE
GRAPHYTE V2 is the same as the original SNYPER-LTE GRAPHYTE.
This user manual will cover all the aspects of the features, setup and use of both versions
of the SNYPER-LTE Graphyte (EU) and, SNYPER-LTE Graphyte (USA) and SNYPER-
LTE Graphyte (AP). When describing features common to all versions of the product, the
term ‘SNYPER Graphyte’ is used throughout this user manual. No prior knowledge of the
operating principles of the cellular mobile network is required.
This manual explains how to use the SNYPER Graphyte to conduct cellular surveys, identify
the cells available at the survey location, their characteristics and signal strength. This
information may then be used to help successfully deploy a cellular connected device such
as a modem or router.
This document describes the operation of the SNYPER Graphyte (all versions) with software
version 6.10.10 – 4.01 loaded. Operation with other software versions may be different.
Introduction