Registered in England No. 08405712
VAT Registration No. GB163 04 0349
Siretta Ltd
Basingstoke Road
Spencers Wood
Reading
Berkshire RG7 1PW
sales
email
web
+44(0)118 976 9000
sales@siretta.com
www.siretta.com
30
SNYPER-LTE Graphyte
User Manual
Download Latest Edition
Rev 1.7
LiveSCAN
LiveSCAN works by locking the SNYPER Graphyte’s radio receiver to the operating
frequency of a cell chosen by the user for monitoring. Once the SNYPER Graphyte
locks to the frequency channel that the cell is operating at, a continuous update of
the received signal strength of that cell will be reported on the SNYPER Graphyte.
The SNYPER Graphyte V2 is additionally able to show RSCP & ECIO (3G) and RSRP
& RSRQ (4G).
LiveSCAN can be used in two modes:
» Directional LiveSCAN: When conducting LiveSCAN with a directional antenna,
moving the antenna horizontally will show the direction with the highest signal
strength. A .csv le of each survey taken during the LiveSCAN is stored for
analysis if required. A directional antenna covering all frequencies is supplied with
the SNYPER Graphyte to perform this task.
» Omni-directional: When conducting LiveSCAN with an omni-directional
antenna, moving the SNYPER Graphyte to different areas in a building will show
“hotspots” with the highest signal strength.
Users are encouraged to use their own antennas when performing a survey or
LiveSCAN on the SNYPER Graphyte.
Using the antenna which is intended to be used in the proposed installation will give
the best indication of how the antenna will perform. Placing the antenna in potential
mounting locations and orientations will allow the operator to make an informed
choice about what the best antenna placement is for that installation.
To Next Page
Loading...