SIRETTA SNYPER-LTE graphyte - PC Connect

Registered in England No. 08405712
VAT Registration No. GB163 04 0349
Siretta Ltd
Basingstoke Road
Spencers Wood
Reading
Berkshire RG7 1PW
sales
email
web
+44(0)118 976 9000
sales@siretta.com
www.siretta.com
39
SNYPER-LTE Graphyte
User Manual
Download Latest Edition
Rev 1.7
PC Connect
Figure 37. Prepare for data download Figure 38. SNYPER-Graphyte connected to a PC
Step 1. Connect the supplied USB cable to the SNYPER Graphyte and PC.
Step 2. Select ‘PC Connect’ from the main menu, and use the RIGHT button to
enable PC Connect.
Depending on how the PC is congured, Windows Explorer may open automatically
with a drive named ‘GRAPHYTE’. If Windows Explorer does not open automatically,
open it by pressing and holding the Windows key and ‘e’. A new drive called
‘GRAPHYTE’ will be visible, containing one directory with the same name as the les
saved.
The PC Connect feature allows surveys stored on the SNYPER-Graphyte to be
downloaded onto a PC using a USB connection.
When connected to a PC using a USB cable, the SNYPER-Graphyte is put into a
mode where it appears to be a USB memory stick. Then saved les may be copied
from the SNYPER-Graphyte le system to the PC. Files that will be available are
HTML and CSV format les containing the collected survey data (when using the
default settings). Note that creating and saving these les may be disabled under the
Documents setup option.
To download data from the SNYPER Graphyte follow the steps below:
Step 3. Use copy and paste to transfer les from the SNYPER Graphyte to the
desired location on the PC.