Registered in England No. 08405712
VAT Registration No. GB163 04 0349
Siretta Ltd
Basingstoke Road
Spencers Wood
Reading
Berkshire RG7 1PW
sales
email
web
+44(0)118 976 9000
sales@siretta.com
www.siretta.com
43
SNYPER-LTE Graphyte
User Manual
Download Latest Edition
Rev 1.7
Viewing Multiple Cycle Survey Results on a PC
The information recorded in the .HTML report will depend on the survey type you
performed. Multiple cycle surveys also report the following:
» ‘Seen’ column - Count of how many surveys that each cell appeared in, and in
brackets what percentage of surveys that represents.
» dBm, % and RSSI column - Average signal strength of these parameters.
Surveys where the cell was not detected are not included in the average.
» Summary results are based on the average % of the seen cells.
» At the bottom of each section there is a signal log. This shows how a cells signal
strength varies over time.
NOTE - With large logs, these graphs can get very busy. Similar plots may be generated
by the user using the .csv le that is generated, where user lters can be applied to make
interpretation easier.
Figure 42. .HTML report
.HTML Report
A multiple cycle survey will create 3 les in a new directory. The directory created will
be in the root of the SNYPER Graphyte’s le system and the name of the directory
and les will be coded with date and time identiers.
For mulltiple cycle surveys, there is an additional .CSV le containing all the data
logged from all the individual surveys. This larger .CSV le has the letter ‘L’ as its rst
character to indicate that it contains all the logged data.
Hovering over a data point on the graph with the mouse shows more information
about that data point: The survey number, the network with index number in
brackets, and the signal strength.
GRAPHYTE Cellular Survey Results - 15 Survey
To Next Page
Loading...