What to do if my Sirius Satellite Radio displays 'Acquiring Signal'?
If your Sirius Satellite Radio displays 'Acquiring Signal', it means the radio is not receiving a satellite signal. Make sure there are no obstructions over or around the satellite antenna. Try changing the vehicle's location to avoid obstacles like bridges, overpasses, trees, or buildings.
Why is there no sound coming from my Sirius Satellite Radio?
If there is no sound from your Sirius Satellite Radio, the audio cables may not be connected properly, or the FM radio might be set to the wrong frequency. Check the audio cable connections at both the Sirius radio dock and the radio itself. Also, ensure that your FM radio is tuned to the same FM frequency as the Sirius radio.
How to fix audio static or loss of clarity on Sirius Satellite Radio?
If you are experiencing audio static or a loss of clarity with your Sirius Satellite Radio, it may be due to static on the FM frequency. Try to find a clear FM frequency on your car radio and then set the FM transmitter frequency of your Sirius Satellite Radio to match it. If you are using the AUX audio connector, check the cable connections.
What to do if my Sirius Satellite Radio does not power on?
If your Sirius Satellite Radio does not power on, the cause may be a blown fuse or a disconnected power cable. Check the fuse and the power cable connection.
Why does my Sirius Satellite Radio display 'Antenna Not Detected'?
If your Sirius Satellite Radio displays 'Antenna Not Detected', it means the satellite antenna is not connected to the radio dock. You should check the satellite antenna connection to the dock.
What to do if my Sirius Satellite Radio Receiver has no sound?
If your Sirius Satellite Radio Receiver has no sound, it could be due to disconnected audio cables or the FM radio being set to the wrong frequency. Check the audio cables at both the receiver dock and the radio itself. Also, ensure your FM radio is tuned to the same FM frequency as the receiver.
Why does my Sirius Satellite Radio Receiver display 'Acquiring Signal'?
The 'Acquiring Signal' message on your Sirius Satellite Radio Receiver indicates that it is not receiving a satellite signal. This could be due to obstacles blocking the antenna's line of sight. Try checking for any obstructions above or around the satellite antenna. You might also need to change the vehicle's location to avoid obstacles such as bridges, overpasses, trees, or buildings.
What to do if Sirius Satellite Radio Receiver displays 'Antenna Not Detected'?
If your Sirius Satellite Radio Receiver displays 'Antenna Not Detected', the satellite antenna might not be properly connected to the receiver dock. You should check the satellite antenna connection to the dock.
How to troubleshoot a Sirius Satellite Radio Receiver that does not power on?
If your Sirius Satellite Radio Receiver does not power on, the cause may be a blown fuse, or the power cable is not properly connected. Check for a bad fuse and check power cable connection to resolve this issue.
General| Brand | Sirius Satellite Radio |
|---|---|
| Model | Starmate 3 |
| Category | Radio |
| Language | English |
Device compliance with FCC Part 15, subject to two conditions regarding interference.
Apparatus compliance with Canadian ICES-003.
Precautions for handling liquid crystal fluid and safe operation of the device.
Specific warnings for drivers, operating temperature, and general use of the radio.
Guidance on selecting a safe and visible location and mounting the vehicle dock.
Recommendations for optimal magnetic antenna mounting locations on vehicles.
Instructions for connecting the cigarette lighter adapter to the vehicle dock.
Steps to install the vehicle dock adapter and securely place the radio.
How to connect the SIRIUS radio wirelessly via its FM transmitter.
Methods for wired audio connection to the vehicle radio.
Steps to activate the SIRIUS service after installation.
Identifies and describes the buttons and controls of the SIRIUS Starmate 3 unit.
Identifies and describes the buttons on the remote control.
Identifies and describes controls and connectors on the vehicle dock.
Explains the information displayed on the SIRIUS Starmate 3 screen.
How to navigate and select channels and categories on the radio.
Details the function of the DISP button for display modes and channel lists.
Instructions for selecting channels by entering their three-digit numbers.
How to store and recall favorite channels using the BAND button and presets.
How to save and recall artist names, songs, and sports teams for alerts.
Functionality of the Jump button for quick access to programmed channels.
How to set up alerts for favorite sports teams playing games.
How to use the FM Preset button for the built-in FM transmitter.
Displays the unique 12-digit SIRIUS ID (SID) required for service activation.
Allows creation of FM preset frequencies and control of the FM transmitter.
How to store favorite sports teams for game alerts.
Access to various radio settings like Jump, Display, Memory, Audio, Parental Control, and Time.
To Next Page
