14
Home Installation
AUX IN or LINE IN connection of your home stereo system, using the provided
Stereo Audio Cable.
1 Take the provided Stereo Audio Cable and connect the single 1/8” (3.5
mm) connector to the AUDIO OUT connector at the rear of the Home
Dock.
2 Connect the white left and red right Stereo Audio Cable connectors (“L”
and “R” are also on each respective tip) to any available input other
than PHONO on your home stereo system. (If your stereo’s inputs are
marked red and black, simply connect the white plug to the black input.)
3 Turn the home stereo system On, and make sure you select the correct
input on your stereo system for the AUX In or LINE In connection.
AUDIO OUT ANT IN DC IN
L
R
To Next Page
Loading...
Need help?
General
