12
8 Bring up WL-303/WL-306/WL-312
Connect the supplied power-adapter to the power inlet port and connect it to
a wall outlet. TheWL-303/WL-306/WL-312 automatically enters the self-test
phase. During self-test phase, the Power LED will blink briefly, and then will
be lit continuously to indicate that this product is in normal operation.
9 Initial Setup WL-303/WL-306/WL-312
LOGIN procedure
2. Click OPEN your browser (e.g. Internet Explorer).
3. Type http://192.168.0.1 in address bar and press [Enter]
To Next Page
Loading...
