13
8 Bringing up the WL-347/WL-348
Connect the supplied power-adapter to the power inlet port and connect it to
a wall outlet. The WL-347/WL-348 automatically enters the self-test phase.
During self-test phase, the Power LED will blink briefly, and then will be lit
continuously to indicate that this product is in normal operation.
9 Initial Setup WL-347/WL-348
LOGIN procedure
2. OPEN your browser (e.g. Internet Explorer).
3.
Type http://192.168.0.1 in address bar and press [Enter]
To Next Page
Loading...
