Enable/Disable QoS You can check “Enable QoS” to enable QoS
functionality for the WAN port.
Add a rule Enter all the data required for the rule you wish to set and click
Add to save this rule.
Edit a QoS rule Select the rule you want to edit and click “Edit”, then enter
the detail form of the QoS rule. Click “Apply” after editing the form and the
rule will be saved.
Discipline Save allows to save the selected Qos discipline without changing
the current rules.
Rules&Action summary provides an overview of the current effective Qos
settings.
Click ‘Add’ To save and apply the new rule.
To Next Page
Loading...
