Need help?Do you have a question about the SitOnit Seating NOVO and is the answer not in the manual?
Read all instructions before installing to prevent product failure or potential injury.
The 1/4" Hex L-Key is the essential tool provided for chair assembly.
Lists and illustrates the primary components of the chair: Back, Base, Seat, and Cylinder.
Details the Standard Synchro and Synchro with Seat-Depth Adjustment mechanisms, including hardware.
Slide the yoke into the mechanism's bracket, aligning the hole patterns for secure attachment.
Attach the back assembly to the seat using screws, ensuring a minimum torque of 150 in-lbs.
Insert the cylinder into the center of the chair base, pushing until it is fully seated.
Align the chair mechanism with the cylinder and push until seated, confirming it remains attached.
General| Product Name | NOVO |
|---|---|
| Brand | SitOnit Seating |
| Category | Indoor Furnishing |
| Adjustability | Yes |
| Back Options | Mesh |
| Material | Fabric |
| Adjustments | Lumbar Support |
To Next Page