SixThreeZero AROUND THE BLOCK - Page 23

WATCH ASSEMBLY VIDEOS ON OUR YOUTUBE CHANNEL, HTTPS://SIXTHREEZERO.COM/PAGES/ASSEMBLY
Align the front rear rack arms to the eyelets on the frame
below the seat. Use a 4mm allen key to tighten the screws
and attach the rear rack to the frame.
13
4MM
ALLEN KEY
REAR
RACK
(2) 4MM ALLEN
KEY SCREWS
( pre-installed)
14
5MM
ALLEN KEY
(2) 5MM ALLEN
KEY SCREWS
( pre-installed)
Install the bottom rear rack arms to the frame using the 5mm allen
screws. Tighten with a 5mm allen key. Repeat on both sides.