WATCH ASSEMBLY VIDEOS ON OUR YOUTUBE CHANNEL, HTTPS://SIXTHREEZERO.COM/PAGES/ASSEMBLY
02
04
Slide the cable housing up toward the
brake lever until it fits snug inside the barrel
adjuster.
05
Turn the lock ring on the barrel adjuster
clockwise, tightening the barrel to prevent
any loose movement.
LOCK RING
03
Pull on the cable and slide it through the
narrow crevice that runs along the brake
lever.
BRAKE
LEVER CREVICE
BARREL
HANGER
BARREL
ADJUSTER
BARREL ADJUSTER
Attach the brake cable to the brake lever
by squeezing the lever and inserting the
barrel into the barrel hanger.
To Next Page
Loading...
