WATCH ASSEMBLY VIDEOS ON OUR YOUTUBE CHANNEL, HTTPS://SIXTHREEZERO.COM/PAGES/ASSEMBLY
08
Slide the exposed end of the metal into the metal tube
hanger, located on the left brake arm. Make sure the
metal tube is hooked securely inside the hanger.
LEFT
BRAKE ARM
METAL TUBE
HANGER
END OF
METAL TUBE
Using a 5mm Allen key, loosen the brake cable adjustment
screw. Slide remaining brake cable between the right
brake arm and the adjustment screw.
BRAKE ADJUSTMENT SCREW
RIGHT BRAKE ARM
09
5MM ALLEN KEY
To Next Page
Loading...
