HAVING TROUBLE? CALL 310.982.2877 OR EMAIL THETEAM@SIXTHREEZERO.COM
05
All of the components for the quick release skewer are
attached out of the box.
Unscrew QR5 and remove QR4. Do not remove QR2 and
QR3 from the quick release handle QR1.
- QR1
QR4QR2 QR3 QR5
----
----
-
----
Quick release skewer must be installed correctly to avoid bicycle damage
and/or injuries.
NOTE
06
Insert the quick release skewer through the hub opening
on either side of the wheel, as shown below.
Slide quick release skewer completely through the hub.
To Next Page
Loading...
