HAVING TROUBLE? CALL 310.982.2877 OR EMAIL THETEAM@SIXTHREEZERO.COM
02
Simply unwrap the black spiral wire covering until the
Quick Disconnect fitting is exposed. If necessary, un-thread
and re-thread the Quick Disconnect fitting(s).
Make sure that the battery is inserted fully into the bicycle.
If it is not, the bicycle will receive no power causing all of
the electronics to not turn on.
For any additional troubleshooting help, please feel free to
contact our team at:
(310) 982-2877
theteam@sixthreezero.com
Tell us about your assembly experience. If you have/
had any trouble at all or didn’t, and would like to leave
feedback and help us improve our assembly instructions
you can.
Type this URL into your browser:
goo.gl/6enZji
SURVEY
To Next Page
Loading...
