WATCH ASSEMBLY VIDEOS ON OUR YOUTUBE CHANNEL, HTTPS://SIXTHREEZERO.COM/PAGES/ASSEMBLY
23
Apply grease to the threading on both
pedals.
Select the pedal stamped R (located on the
tip of the threading) and locate the right side
of the bike (with the chain and chain guard).
Align threading with the right crank arm,
and turn the pedal clockwise to tighten it.
Locate the pedal stamped L and align
with the left crank arm. The left side
pedal is reverse-threaded, tightening in a
counterclockwise direction.
B I C YC L E O R
AUTO GREASE
15MM
MULTI-TOOL
PEDALS
We recommend hand tightening initially and
following up with a 15mm wrench to fully
tighten down the pedals.
RIGHT PEDAL LEFT PEDAL
To Next Page
Loading...
