User instructions
1. Inserting a microSD card
Insert the card all the way in until it clicks into place. Only use a branded microSD card and format it on a
computer prior to use. Non-branded cards may cause erratic camera performance.
2. Installing and removing battery
A. Push the battery cover tab to open it.
B. Install battery into camera as indicated by +/- symbols and direction of arrows marked on battery and
push it all the way in.
C. Battery charge indicator : please refer to pictures.
D. Remove Battery: open cover to take battery out.
3. Charging
A. Charging can be done by connecting the camera to a computer, or using a power adaptor or a car
charger.
B. The M10 can record video while charging (select Car Mode in Menu）
C. The M10 can be charged even when it is powered off.
4. Switching camera on and o
A. Press and hold power button for 3 to 5 seconds to turn it on / off.
5. Car camera mode
A. Go to the video menu and select car mode to record.
B. Camera will switch on automatically when the car starts while connected to a car charger.
To Next Page
Loading...
