Need help?Do you have a question about the SK Medical SK-600i and is the answer not in the manual?
General| Brand | SK Medical |
|---|---|
| Model | SK-600i |
| Category | Water Pump |
| Language | English |
Presents basic safety information for operator attention.
Indicates imminent hazards that could cause death or serious injury.
Details potential hazards or unsafe practices leading to death/serious injury.
Lists potential hazards or unsafe practices causing minor injury or damage.
Details the pump's components and overall performance characteristics.
Covers the battery's overview, guidelines, maintenance, and recycling.
Provides recommendations for safe and effective battery use.
Guides on setting up the infusion pump correctly.
Covers inspection, cleaning, and preventive maintenance procedures.
Detailed step-by-step instructions for using the pump.
Guide on turning on and starting the infusion pump.
Instructions for correctly installing the infusion tube.
How to configure flow rate, volume limit, and bed number.
Steps to initiate the infusion process.
How to configure basic system settings.
Adjusting the rate of fluid delivery.
Setting the total volume to be infused.
Procedure for calibrating the pressure sensor.
Steps to ensure accurate infusion volume delivery.
Steps to take when an alarm occurs.
Specific data on occlusion alarm triggers and volume limits.
Data and charts related to infusion accuracy.
Detailed list of alarms, their causes, and recommended solutions.
To Next Page