Need help?Do you have a question about the SKAR Audio RP-800.1D RP-1200.1D RP-2000.1D and is the answer not in the manual?
General| Amplifier Class | Class D |
|---|---|
| Number of Channels | 1 |
| Frequency Response | 20 Hz - 250 Hz |
| Subsonic Filter | 10Hz - 50Hz |
| Bass Boost | 0 - 12dB |
| Model | RP-1200.1D |
| RMS Power at 1 Ohm (RP-800.1D) | 800W |
| RMS Power at 2 Ohms (RP-800.1D) | 500W |
| RMS Power at 4 Ohms (RP-800.1D) | 300W |
| Peak Power (RP-800.1D) | 1600W |
| RMS Power at 1 Ohm (RP-1200.1D) | 1200W |
| RMS Power at 2 Ohms (RP-1200.1D) | 800W |
| RMS Power at 4 Ohms (RP-1200.1D) | 400W |
| RMS Power at 4 Ohms (RP-1200.1D - corrected) | 400W |
| Peak Power (RP-1200.1D) | 2400W |
| RMS Power at 1 Ohm (RP-2000.1D) | 2000W |
| RMS Power at 2 Ohms (RP-2000.1D) | 1200W |
| RMS Power at 2 Ohms (RP-2000.1D - corrected) | 1200W |
| Peak Power (RP-2000.1D) | 4000W |
| Input Sensitivity | 0.2V - 6V |
Welcome message and advice to read the manual for optimal performance.
Key features of digital monoblock amplifiers.
Detailed specifications for monoblock models.
Key features of multi-channel amplifiers.
Detailed specifications for multi-channel models.
Guidance on connecting the main power cables.
Details on connecting power, ground, and remote turn-on cables.
Wiring RCA inputs and speaker outputs for monoblock amplifiers.
Diagrams for connecting speakers to monoblock amplifiers.
Instructions for connecting two amplifiers for increased power.
RCA input and speaker connection for 4-channel amplifiers.
RCA input and speaker connection for 5-channel amplifiers.
Guidance on resolving issues like no sound, protection mode, and noise.
To Next Page
