SKE EK-010 User Manual (English)

Warning

1．

before connecting them to the UPS, then choose the corresponding

voltage.

2. Please charge fully before initial use.

3. Dropping, hitting, disassembling and repairing privately are forbidden.

4. Do not put the UPS into water or make it wet.

5. Do not dispose of the UPS in fire or heating it.

6. Do not use the UPS in any flammable environments.

7. Do not put the UPS in any places where Children can reach.

Do check the working voltage, current and polarity of the loads

100~240Vac/50-60Hz

12Watt

—

5、7.5、9、12Vdc 1000mA

—

5Vdc 1000mA

2200mAhx4

* Products specif ica tions are subject to c han ge without notice.

166x103x29mm

0.53kg

{ }

1 )

2 ) A C p o w e r c a b l e

3 ) D C o u t p u t c a b l e s ( 2 e n d s )

4 ) U s e r ' s m a n u a l

5 ) Wa r r a n t y c a r d

M o d e l E K- 0 1 0

1) High capacity lithium batteries, provides long backup to the loads.

2) High compatibility, suitable for most digital products in the market.

3) USB output (5V), can supply charging for digital products like mobile

phone, PDA, PSP, IPOD, MP4… etc.

4) Intelligent circuit design with over-charging, over-discharging and

short circuit protections.

5) Built-in adapter allows wide AC voltage range (80~265Vac).

USB

Output:5V 1000mA

power

1) ON/OFF Switch

2) 12Vdc LED Indicator

3) 9Vdc LED Indicator

4) 7.5Vdc LED Indicator

5) 5Vdc LED Indicator

7) USB (5Vdc) output

8) Output socket (5/7.5/9/12Vdc)

9) Output voltage selector

10) AC input socket

Battery status indicator

①

②

③

④

⑤

⑥

⑦

⑧ ⑨ ⑩

1 2

Output

Output Voltage Selector

AC Input: 100~240V

50/60Hz

12V

9V 7.5V 5V

USER'S MANUAL

Thank you for choosing our SKE UPS. Before operating this unit,

please read the USER'S MANUAL carefully in order to make sure

that the best possible performance is obtained.

Please do not arbit rar ily disassemble, s que eze, short circuit

the batteries or di spo se the batteries int o wat er or fire. Do not

put the UPS in any plac es wh ere is over 60℃（140℉）.

1 . STCB UPS package

2 . Instructions of the components

3 . Features

4 . High compatibilities

5 . How to use

How to use

6 . Specifications

Model

Rated working vol tag e

Output power(Ma x.)

DC output voltage a nd cu rrent

USB output voltag e and c urrent

Output polarity

Specification o f lit hium batteries

Dimension

Weig ht

Bat.S tatus 5V 7.5V 9V 12V

E K- 0 1 0

MOBILE PHONE

DIGITAL CAMERA

WIFI

IPAD

MP3

MONITOR

PSP

TIME RECORDER

1) In order to prevent over-discharging of the lithium batteries, please

restart the UPS when AC is available after low battery cutoff.

2) Press the POWER button for 2~3 seconds to turn on the UPS and you will

see the light up of the battery status indicator (GREEN means battery full,

YELLOW means 50% full and RED stands for battery low). The BLUE LED

indicates the current output voltage, and the user can choose the preferred

output voltage (5V, 7.5V, 9V or 12Vdc) by sliding the voltage selection

button. Press again the POWER button for 2~3 seconds to turn off the UPS

(all LED will be off and no more output provided).

3) Before connecting the loads to the UPS, it's a must to check their nominal

working voltage, current and polarity which you can find on their original

adapters.

4) Plug-and-play USB provides stable charging to the digital products with

their original charging cables.

5) When AC blackout happens or this unit is being used as a portable power bank,

please DO charge it without further delay when the battery status indicator turns

RED.

6) Please keep the UPS in a cool space after fully charging if it is not in use for

an extended period. Charging once a month is highly recommended.

Need help?

Do you have a question about the SKE EK-010 and is the answer not in the manual?

SKE EK-010 Specifications

General

Brand	SKE
Model	EK-010
Category	UPS
Language	English

Summary

SKE UPS Package Contents

Model EK-010

Identifies the specific model of the SKE UPS unit.

AC Power Cable

The cable used to connect the UPS to an AC power source.

DC Output Cables

Cables for connecting DC output voltage devices to the UPS.

User's Manual

This document providing operating instructions and information.

Warranty Card

Card detailing the warranty terms and conditions for the product.

UPS Component Identification

ON/OFF Switch

Controls the power state of the UPS unit.

DC Output Voltage Indicators

LEDs indicating the selected DC output voltage (5V, 7.5V, 9V, 12V).

Battery Status Indicator

Indicates the current charge level of the UPS battery.

USB Output (5Vdc)

Port for charging digital products via USB.

DC Output Sockets

Sockets providing selectable DC output voltages.

Output Voltage Selector

Button to choose the desired DC output voltage.

AC Input Socket

Port for connecting the AC power adapter.

Key Features of the SKE UPS

High Capacity Lithium Batteries

Provides extended backup power for connected devices.

Broad Compatibility

Suitable for charging most digital products on the market.

Versatile USB Output

Supplies 5V charging for mobile phones, PDAs, and more.

Intelligent Circuit Design

Features over-charge, over-discharge, and short-circuit protection.

Wide AC Voltage Input

Built-in adapter supports 80-265Vac for global use.

UPS Application Diagram

How to Use the SKE UPS

Restarting After Battery Cutoff

Restart the UPS when AC is available after low battery cutoff.

Turning UPS On/Off and Voltage Selection

Use the power button and selector for voltage settings.

Connecting Loads

Verify load voltage, current, and polarity before connecting.

USB Charging

Plug-and-play USB charging for digital products.

Charging as Portable Power Bank

Charge immediately when the battery status indicator turns red.

Storage Recommendations

Keep UPS in a cool space; charge monthly if not in use.

SKE UPS Specifications

Model and Voltage

EK-010 model, 100-240Vac/50-60Hz rated working voltage.

Output Power and Current

12Watt max output, 1000mA DC and USB output.

DC Output Voltages

Supports 5V, 7.5V, 9V, and 12Vdc output.

Lithium Batteries and Dimension

2200mAhx4 batteries, 166x103x29mm dimensions.

Weight

The UPS weighs 0.53kg.

Important Warnings and Precautions

Load Compatibility Check

Verify load voltage, current, and polarity before connection.

Initial Charging

Ensure the UPS is fully charged before first-time use.

Handling and Repair

Avoid dropping, hitting, disassembling, or private repairs.

Water and Fire Safety

Do not expose to water, fire, or high temperatures (over 60°C).

Environmental Safety

Do not use in flammable environments or where children can reach.