10
Setting Analog Time
• Pull out crown and turn to adjust hour and minute hands.
• Push crown back to normal position once time is set.
Switching Between Modes
• Press “B” to toggle through modes in the following order: Time,
Alarm, Stopwatch, Dual Time
EL Backlight
• To make display glow for 3 seconds, press “C”
Setting the Time
1. In Time mode, press and hold “A” until seconds ash, then press “D”
to reset seconds to “00”.
2. Press “B” select hour, then press “D” to advance. Holding “D” will
advance hour at a faster speed.
3. Repeat step 2 to set Minutes, Month, Date, Day, 12/24H Format.
4. Press “A” to exit Time Setting mode.
Alarm and Chime ON/OFF
• In Alarm mode, press “D” to turn on/off the Alarm and Chime sound
in the following sequence: Alarm and Chime OFF, Alarm ON, Chime
ON, Alarm and Chime ON.
• Alarm sounds at the preset time for 60 seconds
if sound is set to ON. Pressing any button will silence it.
To Next Page
Loading...
General