SKF ConCentra ball bearing
– ready-to-mount offer
SKF ConCentra ball bearings and units are
part of SKF’s extensive line of ready-to-
install mounted products. These units, with
true concentric location on the shaft, are
particularly well suited for applications
where there are relatively high speeds and
moderate loads and where vibration, low
noise, and minimal maintenance are key
operational parameters.
SKF ConCentra ball bearings and units
can provide several advantages including:
Easy handling•
fast, easy and safe to mount and –
dismount
patented locking – technology
no loose parts –
no need – to prevent the sleeve from
rotating during mounting
High • performance
full concentric locking and inner ring –
entirely supported by the shaft
high – performance with commercial
grade shafts
reduced vibration levels –
Minimum maintenance•
long service life with high quality grea
–
se
under certain operating conditions the –
bearings are relubrication-free
Flexibility•
available as ready-to-mount units or as –
insert bearings
global availability in both metric and –
inch sizes
SKF ConCentra ball bearings are available as
single bearings or assembled with plummer
block or flanged housings.
A
3
To Next Page
Loading...