Need help?Do you have a question about the SKF TKTL 30 and is the answer not in the manual?
General| Type | Infrared Thermometer |
|---|---|
| Automatic shut-off | Yes |
| Battery type | AAA |
| Resolution | 0.1°C |
| Display | LCD |
| Power Supply | 2 x AAA batteries |
| Emissivity | Adjustable from 0.1 to 1.0 |
| Laser sighting | Yes |
| Probe type | Non-contact |
| Operating temperature | 0°C to 50°C |
| Storage temperature | -20°C to 60°C |
| Description | Infrared thermometer for non-contact temperature measurement |
Official statement of product compliance with European directives.
Essential warnings and guidelines for safe operation involving laser emissions.
Physical measurements of the thermometer and its carrying case.
Key data including Distance to Spot ratio and spectral response.
Information on the expected operational duration on a single battery charge.
Temperature limits for built-in and external Type K sensors.
Explanation of error codes (Er2, Er3) and operational status.
Instructions for turning the device on and configuring automatic power-off.
How to use the Lock and Hold features for stable readings.
Overview of Maximum, Minimum, Difference, and Average measurement modes.
Using High Alarm (HAL) and Low Alarm (LAL) for threshold monitoring.
Detailed display information for Minimum, Difference, and Average modes.
Setting the emissivity value for accurate surface temperature measurements.
Examples of emissivity settings (E=0.95, E=0.79) and their impact.
How to enable the display backlight and the laser targeting pointer.
Procedure for safely installing and replacing the device batteries.
Instructions for cleaning the device to maintain performance and longevity.
Contact information and resources for technical support and service.
To Next Page
