SKF VIBRACON - SKF Vibracon Installation Steps; Component Alignment Check; Component Adjustment; Adjustment Outcome

2. Adjustment of the component
4. Installation check
1. Alignment check of the component
3. Outcome of the adjustment: gaps to fill
6. Installation of the SKF Vibracon
8. Installation of bolts
5. Foundation check
7. Batch number in sight/front for traceability
9. Adjustment to height
10. Check contact area
11. Check maximum height
12. Release vertical adjustment bolts
✓
✓
✓ ✓
✓
✓
✓ ✓
✓
✗
✓
✓