Need help?Do you have a question about the Ski-Doo Bombardier MPEM 219 700 090 and is the answer not in the manual?
General| Part Number | 219 700 090 |
|---|---|
| Brand | Ski-Doo Bombardier |
| Category | Motherboard |
| Voltage | 12V |
| Compatibility | Ski-Doo snowmobiles |
| Function | Engine management |
Defines key terms like DESS, MPEM, VEH, PGMR, S#, SR, LCD, KEY used in the programmer.
Explains the Digitally Encoded Security System (DESS) and its components like MPEM, safety lanyard, and switch.
Details the keypad layout, including control and data entry areas, and number key functions.
Explains the operation of ON/C, OFF, MENU, ?, and dot keys for navigation and data entry.
Describes the communication cable for updating and MPEM communication.
Instructions for applying the password decal and installing batteries, including a caution.
Details the startup screen, password prompt, and the need for an authorization number for configuration.
How to change the programmer's display language, including a special startup method.
Steps to modify the 4-digit password, including contacting a Service Representative.
How to check keys for proper electronic components before programming.
Explains programming or deleting keys, including the limit of 8 safety lanyards.
Step-by-step guide for programming a new key, including plugging it in and confirming transfer.
Step-by-step guide for erasing programmed keys, requiring at least one key to be programmed.
How to enter and update customer names, with notes on data entry.
Procedure to enter and modify the delivery date in YY/MM/DD format.
Displays the vehicle's serial number, which is read-only and factory-programmed.
Allows modification of engine parameters like RPM limiter and ignition timing.
Provides access to total, service, and rental hours, with procedures for each.
Shows current date, software version, and previous programmer details.
Crucial step to transfer and save all entered information from the programmer to the MPEM.
Steps to attempt starting a watercraft using the programmer, and troubleshooting if it fails.
Allows selection of display language (English, French, Spanish).
Adjusts the screen contrast using keys 1 for darker and 4 for lighter display.
Performs an internal test to verify the programmer's proper operation and cable connectivity.
Displays programmer version, serial number, current date, and APOP delay settings.
Procedure to obtain an authorization number and configure programmer options for Sea-Doo or Ski-Doo.
Explains common error displays, their causes (data entry, connection, unsaved data), and basic remedies.
Details beep codes (2, 1, 4, 8 SHORT/LONG) and their associated causes and remedies for system diagnostics.
Explains diagnostic codes (No BEEP, 1 LONG/1 SHORT, 2 SHORT/LONG, 3 SHORT) and their causes/remedies.
Lists service representative phone numbers for the US, Canada, South America, Singapore, Paris, and Russia.
A chart correlating programmer numbers (2-8) with advanced or retarded ignition timing corrections in degrees.
To Next Page
