Ski-Doo Mach Z User Manual

Section 08 STEERING / FRONT SUSPENSION
Sub-Section 01 (STEERING SYSTEM)
08-01-10
TYPICAL
1. Straight edge
2. Measure here
LUBRICATION
WARNING : Do not lubricate throttle and /
or brake cable, housing and spring cou-
pler bolts.
26, Grease Fittings
Only use low temperature grease (P / N 413 7061
00).
The following symbols will be used to show what
type of lubricant should be used at the suitable
locations.
1. Low temperature grease
2. Penetrating lubricant (P / N 293 6000 16)
Lubricate :
– Steering column.
– Upper and lower control arms drop link and tie
rod ends.
– Grease ski legs, ski pivots and idler arm.
– Coat stabilizer sliders with grease, and oil their
ball joints if so equipped.
A06G03A
2
1
;
A00G01A
2
1
1

Ski-Doo Mach Z Specifications

General

Engine Displacement	899 cc
Horsepower	180 hp
Track Length	137 inches
Track Width	15 inches
Cylinders	2
Engine Stroke	2-Stroke
Cooling	Liquid
Fuel System	Electronic Fuel Injection (EFI)
Seating Capacity	1
Fuel Capacity	10.6 gallons
Brake System	Hydraulic