Ski-Doo Mach Z User Manual

Section 01 SERVICE TOOLS AND SERVICE PRODUCTS
Sub-Section 02 (SERVICE PRODUCTS)
SERVICE PRODUCTS
MANDATORY SERVICE PRODUCTS
o
NOTE : The numbers outlined in black (example : ❑ ) are reference to tool numbers from other divisions
(Sea-Doo Watercraft and /or Sea-Doo Jet Boats). Matching reference numbers indicate the same tool is being
used, even if the part numbers are different.
Loctite@ is a trademarks of Loctite Corporation,
Dow
Corning@ is a trademarks of Dow Corning Corporation.
Retaining compound
m
(p/ N 4137031 00)
Loctite@ RC / 609 :
Retaining compound (1 O
mL)
(green)
AOOB2S4
APPLICATION
Used for retaining bushings, bear-
ings in slightly worn housing or
on shaft.
Paste gasket
m
(p/ N 4137027 00)
Loctite
@
515 :
Gasket eliminator (50
mL)
-
AOOB2T4
APPLICATION
Crankcase halves transmission
and gearbox mating surfaces.
Medium-strength
m
A
thread locker
(P/ N413 7030 00)
Loctite@ 242 :
Thread locker (1 O mL)
(blue, medium strength)
AOOB324
APPLICATION
Flywheel nut, crankcase studs,
etc.
7
High strength
m’
thread locker
(P/ N413 7074 00)
Loctite@ 271 :
Threadlocker (1 O mL)
(red, high strength)
(TYPICAL)
b
]]1 iljl
I If
I
I Ill
1/1] Ii\{
jll, 1’ II
—m..
=
-
AOOB2U4
APPLICATION
Fasteners and studs up to 1“ di-
ameter.
01-02-1

Ski-Doo Mach Z Specifications

General

Engine Displacement	899 cc
Horsepower	180 hp
Track Length	137 inches
Track Width	15 inches
Cylinders	2
Engine Stroke	2-Stroke
Cooling	Liquid
Fuel System	Electronic Fuel Injection (EFI)
Seating Capacity	1
Fuel Capacity	10.6 gallons
Brake System	Hydraulic