EasyManua.ls Logo

Ski-Doo MX Z 440 - Page 233

Ski-Doo MX Z 440
356 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Section 06 ELECTRICAL
Sub-Section 04 (BATTERY)
06-04-1
BATTERY 4
REMOVAL
All Models
WARNING : Battery BLACK negative ca-
ble must always be disconnected first and
connected last.
WARNING : Never charge or boost bat-
tery while installed on vehicle.
S Series with Electric Starting
Remove belt guard.
Unfasten spark plug cables from fan housing. Un-
plug spark plug caps.
Remove throttle cable and primer hose attach-
ment from air silencer.
Unplug CDI box harness connector.
Slacken collar on carburetor adaptors. Remove air
silencer. CDI box will come along with.
1. Attachment
2. CDI box harness connector
F Series with Electric Starting
Remove air intake silencer.
All Models Except Skandic WT
Unfasten retaining strips.
Open strips and lift battery protective boot.
Remove vent tube.
Step : Unfasten and open
Step : Lift protective boot
Step : Remove vent tube
Skandic WT
Remove air intake silencer.
1. Loosen clamp
;
;
A03C18A
1
2
A06E1BA
1
2
3
1
2
3
A22C09A
1