EasyManua.ls Logo

Ski-Doo MX Z 440 - Page 40

Ski-Doo MX Z 440
356 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Section 02 LUBRIFICATION AND MAINTENANCE
Sub-Section 01 (LUBRICATION AND MAINTENANCE CHART)
02-01-2
* Before installing new spark plugs at pre-season preparation, it is suggested to burn excess storage oil by starting
the engine with the old spark plugs. Only perform this operation in a well ventilated area.
➀ 10-HOUR INSPECTION (To be performed by dealer)
➁ WEEKLY OR EVERY 240 km (150 mi)
➂ MONTHLY OR EVERY 800 km (500 mi)
➃ ONCE A YEAR OR EVERY 3200 km (2000 mi)
➄ STORAGE
➅ PRE-SEASON PREPARATION (To be performed by dealer)
Handlebar Bolts. Retorque to
26 N•m (19 Ibf•ft)
✔ Page 08-01-1
Steering and Front Suspension Mechanism ✔✔✔Sub-sections 08-01 and 08-02
Wear and Condition of Skis and Runners ✔✔ Sub-section 08-02
Steering and Ski Leg Camber Adjustment ✔✔ Sub-section 08-01
Suspension Adjustments
(Except Élan)
AS REQUIRED
Section 07 : See appropriate
sub-section and
Operator’s Guide
Suspension Lubrication
✔✔
Section 07 : See appropriate
sub-section
Suspension Condition
✔✔
Section 07 : See appropriate
sub-section
Suspension Stopper Strap Condition
(Except Élan)
✔
Section 07 : See appropriate
sub-section
Track Condition ✔✔ Sub-section 07-06
Track Tension and Alignment ✔ AS REQUIRED Sub-section 07-06
Spark Plugs* ✔ Sub-section 06-03
Engine Timing ✔✔Sub-section 06-02
Battery Condition ✔✔✔Sub-section 06-04
Headlight Beam Aiming ✔ Page 09-01-1
Wiring Harnesses, Cables and Lines ✔✔ Page 09-01-13
Operation of Lighting System
(HI / LO Beam, Brake Light, etc.)
Test Operation of Emergency Cut-Out Switch
and Tether Cut-Out Switch
✔✔ ✔
Operator’s Guide
Rags in Air Intake and Exhaust System ✔✔This section no. 6
Engine Compartment ✔✔ This section no. 7
Cleaning ✔✔✔This section no. 8
➀➁➂➃➄➅
REFER TO