EasyManuals Logo

Ski-Doo REV G4 Trail/Crossover E-TEC Series User Manual

Ski-Doo REV G4 Trail/Crossover E-TEC Series
291 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #141 background imageLoading...
Page #141 background image
TUNE YOUR RIDE
137
Note: Use the suspension adjustment tool provided with the
vehicle.
Rear Spring
Rear spring preload has an effect on comfort, ride height and
load compensation.
Also, adjusting rear spring preload shifts more or less weight
to the snowmobile front end. As a result, more or less weight
is applied to the skis. This has an effect on performance in
deep snow, steering effort and handling.
Slight suspension bottoming occurring under the worst riding
conditions indicates a good choice of spring preload.
Action Result
Increasing preload
Firmer rear suspension
Higher rear end
More bump absorption ca-
pability
Heavier steering
Decreasing preload
Softer rear suspension
Lower rear end
Less bump absorption ca-
pability
Lighter steering
Better performance and
handling in deep snow
Refer to the following to determine if preload is correct.

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Ski-Doo REV G4 Trail/Crossover E-TEC Series and is the answer not in the manual?

Ski-Doo REV G4 Trail/Crossover E-TEC Series Specifications

General IconGeneral
BrandSki-Doo
ModelREV G4 Trail/Crossover E-TEC Series
CategorySnowmobiles
LanguageEnglish

Related product manuals