To Next PageTo Next Page
Need help?Do you have a question about the Skil 4580 and is the answer not in the manual?
General| Type | Circular Saw |
|---|---|
| Blade Diameter | 7-1/4 inches |
| No-Load Speed | 5, 300 RPM |
| Voltage | 120V |
| Speed | 5, 300 RPM |
| Cord Length | 6 feet |
| Motor Power | 15 Amp |
| Amperage | 15 Amps |
Controls tool power for on/off function.
Controls tool power and adjusts speed on model 4585.
Locks the switch for continuous operation.
Activates dust blowing feature.
Adjusts or secures the foot plate.
Adjusts the cutting speed of the tool.
Selects between orbital and straight cutting modes.
On-tool storage for spare saw blades.
Illuminates the cutting area.
Allows air circulation for cooling.
Comprehensive safety guidelines for tool operation.
Controls the power and starting of the tool.
Adjusts speed for controlled starts on model 4585.
Locks the switch for extended operation.
Procedure for replacing the saw blade.
Instructions for making 45-degree angle cuts.
Optimizing cutting speed based on material type.
Choosing between orbital and straight cutting.
Guidance on selecting the correct saw blades.
Recommendations for cutting metal materials.
Procedure for drilling pilot holes before cuts.
Using the rip fence for parallel cuts.
Techniques for achieving splinter-free cuts.
Instructions for keeping the tool and cord clean.
Details on the product's warranty terms.
Guidelines for environmentally friendly disposal.
