-11-
Application Advise
Use the tool with its standard backing pad for
large work surfaces, corners and edges
(Fig. 13).
U
se the tool with special sanding attachments
for hard to reach areas (Fig. 14).
The flexible sanding attachment is intended for
rounding edged surfaces (Fig. 15a).
The flexible sanding can also be used on all
r
ounded surfaces with a maximum diameter of
10 cm (Fig. 15b).
FIG. 13
FIG. 14
SM 2610938371 01-06 1/12/06 8:10 AM Page 11
To Next Page
Loading...
