Need help?Do you have a question about the Skil 9071 and is the answer not in the manual?
Keep work area clean and well lit. Avoid flammable liquids, gases, or dust. Keep children and bystanders away.
Ensure correct plugs, avoid body contact with grounded surfaces, keep tools dry, and do not misuse the cord.
Stay alert, use safety equipment, avoid accidental starting, and remove adjustment keys before operation.
Do not wear loose clothing or jewellery. Use auxiliary handles for maximum control and avoid overreaching.
Use the correct tool, maintain it, and disconnect power before adjustments or storage to prevent accidental starts.
Have the power tool serviced by a qualified person and replace damaged cords promptly to ensure safety.
Use correct accessories, ensure their speed matches the tool, and inspect for damage before each use.
Wear appropriate PPE, keep bystanders at a safe distance, and use insulated gripping surfaces.
Position the cord clear of accessories, never lay the tool down until stopped, and avoid carrying it at your side.
Clean air vents regularly, do not operate near flammable materials, and avoid liquid coolants.
Maintain a firm grip, avoid placing hands near the accessory, and use special care on corners to prevent kickback.
Secure polishing bonnets, avoid loose strings, and use gradual speed adjustments for effective polishing.
Ensure the mains plug is pulled before mounting. Mount auxiliary handles securely for safe operation.
Use accessories with adequate speed ratings. Clean parts before mounting and ensure accessories are in perfect condition.
Check voltage compatibility, use the on/off switch correctly, and select appropriate speed levels for the task.
Adjust speed to material. Support bonnet fully, move evenly in sections, and avoid stopping or circular motions.
Keep machine and ventilation slots clean. Repairs should be done by authorized service centers.
Warranty covers manufacturing defects. Dispose of machine and accessories responsibly for recycling.
To Next Page
General
