SKILHUNT E3A - Specifications; Product Specifications; Operation; Battery Installation

Note: Tested by one high performance battery !
The product performance may change since battery
different or the different use of environment.
Output
Runtime
Lithium 1100mAh Eneloop Ni-MH 900mAh Alkaline GP ultra
100 Lumens
Beam
Distance
Peak Beam
Intensity
100 minutes
37 m
350 cd
Battery types
75 minutes
45 minutes
-- Max 100 Lumens
-- Rated range: 0.8-2.0V,1.5V Lithium / Ni-MH / Alkaline
-- Dimension: Length 59.5mm, Head diameter 14.0mm
-- Weight: 7.5 g / 0.26 oz (Excluded battery)
-- Included: 1*E3A,1*AAA Alkaline battery,Keyring,
O-rings,User manual
Compatible Batteries
(可兼容使用的电池)
Specifications
Operation
Please make sure the battery is correctly insert, otherwise it will not work !
（请正确安装电池正负极，确保正常工作）
AAA 1.5V Lithium
(一次性1.5V锂电池)
AAA 1.2V Ni-MH
(可充电1.2V镍氢电池)
AAA 1.5V Alkaline
(一次性1.5V碱性电池)
1. Battery installation
Insert the battery positive pole toward the light head
，
otherwise it will not work.
(电池安装正极朝电筒头部，如图)
When the light turning on,the beam is directed away from
the eyes.
(电筒点亮后勿指向眼睛，以免造成损伤)
Take out the battery if you are storing the flashlight for a
long period of time to prevent the battery from leaking.
(电筒长期存放不使用请取出电池，以免电池漏液损坏电筒)
2. ON/OFF
Fully tighten the tailcap to turn the light on. (拧紧电池仓开机)
Twist the tailcap to turn off the light. (拧松电池仓关机)