Operation
Fig. 7 Multi-functional indicator: Control elements on the windshield wiper
lever/control elements on the multifunction steering wheel
First read and observe the introductory information and safety warn-
ings on page 14.
The rocker switch
A
» Fig. 7 and the button
B
are located on the windshield
wiper lever. Switching over and resetting is performed with the adjustment wheel
D
on the multifunction steering wheel » Fig. 7.
Select memory
›
Briefly press the button
B
on the windshield wiper lever or the button
D
on
the multifunction steering wheel to select the desired memory.
Selecting functions with the help of the windshield wiper lever
›
Briefly press the rocker switch
A
up or down. This opens the individual func-
tions of the multi-functional indicator one after the other.
Selecting functions with the help of the multifunction steering wheel
›
Press the button
C
to open the menu of the multifunction steering wheel.
›
Turn the adjustment wheel
D
upwards or downwards. This opens the individu-
al functions of the multi-functional indicator one after the other.
Reseting
›
Select the desired memory.
›
Press the button
B
or, where applicable, the button
D
for more than 1 second.
ä
The following readouts of the selected memory will be set to zero with the but-
ton
B
on the windshield wiper lever or with the button
D
on the multifunction
steering wheel:
›
average fuel consumption,
›
distance driven,
›
average speed,
›
Driving time.
Outside temperature
First read and observe the introductory information and safety warn-
ings on page 14.
The outside temperature appears in the display when the ignition is switched on.
If the outside temperature drops below +4 °C, a snow flake symbol (warning sig-
nal for ice on the road) appears before the temperature indicator and a warning
signal sounds. After pressing the rocker switch
A
at the windshield wiper lev-
er » Fig. 7 or the button
C
at the multifunction steering wheel » Fig. 7, the func-
tion shown last is indicated.
WARNING
Do not only rely upon the information given on the outside temperature dis-
play that there is no ice on the road. Even at temperatures around +4 °C, black
ice may still be on the road surface – warning, drive with care!
Driving time
First read and observe the introductory information and safety warn-
ings on page 14.
The driving time which has elapsed since the memory was last erased, appears in
the display. If you wish to measure the driving time from a particular time, you
must set the memory to zero at this moment in time by pressing the button
B
on
the windshield wiper lever » Fig. 7 or the adjustment wheel
D
on the multifunc-
tion steering wheel » Fig. 7 for longer than 1 second.
The maximum time indicated in both memories is 19 hours and 59 minutes and on
vehicles which are fitted with an information display, it is 99 hours and 59 mi-
nutes. The indicator is set back to null if this period is exceeded.
ä
ä
16
Using the system
To Next Page
Loading...
